3 Claveles Sharpening Stone 1000/3000 with 3 Accessories

Description

The stone-and-accessories set consists of:

• Double-grit sharpening stone (1000/3000)
• Non-slip base for safer sharpening
• 2 sharpening guides (for large and small knives)
• Flattening/repair stone to clean and level the sharpening stone

The accessories tuck away inside the non-slip base itself, staying hidden and taking up less space.

3 Claveles Sharpening Stone 1000/3000 with 3 Accessories — specifications

How to use the sharpening stone

1.- Fully submerge the stone in water for at least 5/10 minutes.

2.- Place it on the non-slip base on a stable surface.

3.- Use the coarse-grit side (1000) to remove any irregularities from the knife.

• • Slide both faces of the blade over the stone in both directions at the angle indicated for the knife (between 10 and 30º)
  • Press the edge lightly, starting at the tip.
  • Repeat the process until the edge is restored.
  • It is important to always keep the same angle. The sharpening guides in the kit can help with this.
  • Apply a little water to the stone from time to time so it always stays wet.

4.- Use the fine-grit side (3000) for finer sharpening and polishing.

• Repeat step 3 but with less pressure, until you achieve a smooth edge.

5.- Wash and dry the stone.

6.- Wash the knife after sharpening.

Important note: ALWAYS keep the same knife angle, which is why we recommend using the sharpening guides when starting out or if you can’t keep the angle constant. The stone must also stay wet throughout the process.